PTO Drive Compressor/Generator Multi-function Units

BGSD

BGSD

Description

When you utilize a Boss BG series PTO generator on your crew trucks you gain a decisive edge, because the BG series PTO generator components become an integral part of the vehicle. The Boss PTO is mounted below the bed, offering many advantages you cannot get using a conventional engine driven generators or inverters.

The Boss BG series takes up no bed space and with only the vehicle engine to maintain, life just got easier!. With fewer parts, the generator now has more mobility.

The Boss Model BGSD is ideal for plastic pipe fusion, night lighting, pumps, heaters, heating irons, electrical tools, sensitive computer equipment and more.

Specifications

Output (kw)6.28.110.0
Weight (lbs)103.5123.5152
Height12.3"12.3"12.3"
Width11.8"11.8"11.8"
Length19.8"19.8"22.15"
Voltage120 or 120/240 single phase120 or 120/240 single phase120 or 120/240 single phase
Input Speed (rpm)180018001800

Standards

6.2 KW Generator8.1 KW Generator10 KW Generator

Quantity of one (1) Boss model 6.2 B.G.S.D Powermax PTO shaft drive underdeck generator(s) to include the following as standard equipment.

  • Generator specifications; lifetime double sealed pre-lubricated bearings, drip proof construction, brushless design, maintenance-free, with one year warranty in material and workmanship from date of purchase.
  • Generator drive consists of the following:
    1. A side-mount PTO and driveshaft that powers the generator without belts, pulleys or chains.
    2. Generator bracket mounts to truck frame rail.
  • Generator frequency held within ±2% of 60 Hz and shall have voltage control of ±2% from no load to full load by electronic engine.
  • Generator interface with truck's electronic engine:
    1. Programmed electronically to provide constant input speed to the generator during varying loads on the engine.
    2. Generator overspeed protection to disengage PTO if RPM limits at the generator are exceeded.
    3. Interface wiring of generator with electronic engine will override all other speed change requests on multiple speed systems when other auxiliary equipment are being used.
  • Instrumentation and receptacles to include:
    1. One (1) voltmeter.
    2. One (1) 125 volt 15 amp duplex receptacles.
    3. One (1) 125 volt 30 amp single twist lock receptacles.
    4. All receptacles have weather tight covers and can be panel or remote mounted per the customer's request.
  • Circuit panel box including two GFI breakers: one (1) 20 amp GFI and one (1) 30 amp GFI (Optional box including one (1) 20 amp GFI and two (2) 15 amp GFI's).
  • Installation
  • Generator mounting bracket attached to truck frame rail and aligned to maintain specified industry standards for driveline operating angles.
  • All material and procedures will follow applicable sections of the current National Electric Code.
  • Operation, parts, and maintenance manual.

Quantity of one (1) Boss model 8.1KW B.G.S.D Powermax PTO shaft drive underdeck generator(s) to include the following:

  • Generator specifications; lifetime double sealed pre-lubricated bearings, drip proof construction, brushless design, maintenance-free, with one year warranty in material and workmanship from date of purchase.
  • Generator drive consists of the following:
    1. A side-mount PTO and driveshaft that powers the generator without belts, pulleys or chains.
    2. Generator bracket mounts to truck frame rail.
  • Generator frequency held within ±2% of 60 Hz and shall have voltage control of ±2% from no load to full load by electronic engine.
  • Generator interface with truck’s electronic engine:
    1. Programmed electronically to provide constant input speed to the generator during varying loads on the engine.
    2. Generator overspeed protection to disengage PTO if RPM limits at the generator are exceeded.
    3. Interface wiring of generator with electronic engine will override all other speed change requests on multiple speed systems when other auxiliary equipment are being used.
  • Instrumentation and receptacles to include:
    1. One (1) voltmeter.
    2. One (1) 125 volt 15 amp duplex receptacles.
    3. One (1) 125 volt 30 amp single twist lock receptacles.
    4. One (1) 125 volt 15 amp single receptacle.
    5. All receptacles have weather tight covers and can be panel or remote mounted per the customer’s request.
  • Circuit panel box including two GFI breakers: one (1) 15 amp GFI, one (1) 20 amp GFI and (1) 30 amp GFI.
  • Installation
  • Generator mounting bracket attached to truck frame rail and aligned to maintain specified industry standards for driveline operating angles.
  • All material and procedures will follow applicable sections of the current National Electric Code.
  • Operation, parts, and maintenance manual.

Quantity of one (1) Boss model 10 B.G.S.D Powermax PTO shaft drive underdeck generator(s) to include the following:

  • Generator specifications; lifetime double sealed pre-lubricated bearings, drip proof construction, brushless design, maintenance-free, with one year warranty in material and workmanship from date of purchase.
  • Generator drive consists of the following:
    1. A side-mount PTO and driveshaft that powers the generator without belts, pulleys or chains.
    2. Generator bracket mounts to truck frame rail.
  • Generator frequency held within ±2% of 60 Hz and shall have voltage control of ±2% from no load to full load by electronic engine.
  • Generator interface with truck’s electronic engine:
    1. Programmed electronically to provide constant input speed to the generator during varying loads on the engine.
    2. Generator overspeed protection to disengage PTO if RPM limits at the generator are exceeded.
    3. Interface wiring of generator with electronic engine will override all other speed change requests on multiple speed systems when other auxiliary equipment are being used.
  • Instrumentation and receptacles to include:
    1. One (1) voltmeter.
    2. One (1) 125 volt 15 amp duplex receptacles.
    3. One (1) 125 volt 30 amp single twist lock receptacles.
    4. All receptacles have weather tight covers and can be panel or remote mounted per the customer’s request.
    5. Two (2) 125 volt 15 amp single receptacles.
  • Circuit panel box including four GFI breakers: one (1) 15 amp GFI, two (2) 20 amp GFI and one (1) 30 amp GFI (Optional box including one (1) 20 amp GFI and two (2) 15 amp GFI’s).
  • Installation
  • Generator mounting bracket attached to truck frame rail and aligned to maintain specified industry standards for driveline operating angles.
  • All material and procedures will follow applicable sections of the current National Electric Code.
  • Operation, parts, and maintenance manual.

* Standards & specifications subject to change without notice.