BOSS Tool Lift Model HL-300
Self-Contained Air Tool Holder and Lift
Air hammers, rock
drills and tampers can be the heaviest items at the jobsite. Loading and
unloading them onto the vehicle is strenuous and often leads to injuries.
The BOSS HL-300 eliminates those concerns by doing the work for you.
The HL-300 will hold up to three air tools and will raise and lower them
from the vehicle to the ground as needed. The unit is a fully self-contained,
hydraulic drive system with built-in safety features to prevent accidental
or rapid movement.
Compact design requires minimum space and can be mounted on deck or in
a cabinet.
GENERAL SPECIFICATIONS
BOSS hydraulic power
unit self-contained on mechanical lift assembly designed for lifting
300 lbs. Capable of a 38.0 inch, lift/drop from the mounting surface.
One year
warranty on hydraulic power unit, hydraulic cylinder and mechanical
lift assembly.
Self-contained power unit to include:
Pilot operated check valves, preset relief valve, 140 micron inlet strainer,
2.5 quart reservoir with magnetic particle collector, 40 micron breather/fill
cap, 12 VDC birotational motor with dual starter solenoids and built-in
100 amp circuit breaker.
Operating parameters: Equal time
on/off, 4 minutes maximum.
Mechanical lift: 19.0 inches wide,
19.5 inches deep, and 54.5 inches tall, capable of holding three tools
within the parameter of the mechanical lift assembly.
Hydraulic cylinder with built-in flow control to maintain safe lift
speed. Pilot operated check valves hold the lift and tools @ any stop
point in the raise and lower lift movement.
Electrical components
to include: Raise/lower switch contained in panel box, all necessary
wire and wire terminals.
Safety devices to include: Pilot
operated check valves, flow control, safety power switch to stop accidental
operation of lift, safety chains for individual tools, safety mechanical/electrical
switch incorporated into locking lift platform device, and necessary
warning and information decals.
Operation, parts and maintenance manual.
Specifications subject to change without notice.
SPECIFICATIONS
| Dimensions |
19½"W
x 54½"H x 19½"Depth |
| Capacity |
3 Tool
mounting with 300 lb. lift capability |
| Travel |
38.0"
Lift/drop from mounting surface |
| Weight |
325 lbs |